Metal Finishing Supplies Ltd, North Street, Bridgtown, Cannock, Staffs,
Universal ultrasonic cleaner is used at low concentrations from 2%--5% depending on what contaminates are to be removed at temperatures of 60 to 75 degrees C. This is a formulation which is made up of a blend of surfactants and sequestrants with the cut of user friendly solvents giving excellent cleaning of metals and plastics components.
This universal spray wash liquid based on potassium silicate formulated with phosphates and surfactants to produce a high performing heavy duty cleaner even at low concentrations 2-5% used at temperatures range of 60 to 80 degrees C Will remove carbonised oils and greases also removes road films and brightens cast aluminium components
This is a highly alkali ferrous cleaning solution containing potassium hydroxide blended with inorganic acids, surfactants and sequestrants producing a product capable of cleaning oil/grease-removing rust-paint and carbon deposits from iron and steel components. This product has been developed for a wide range of cleaning methods from heated soak tanks -agitation -flow and ultrasonic machines also because of its low foam surfactants spraywash machines. Used at concentration of 5 to 50% depending on contamination to be removed
This is a complex blend of 2-Amimoethanol and organic acids making a product that will provide a number of days' protection against rusting depending on storage conditions. Used in combination with cleaning chemicals or in a final hot rinse at 2% concentration
MANSOL ECO STRIP
This is a water based de-carboniser/ Paint and varnish remover. Can be used at room temperature faster results can be achieved by taking the solution to 50c and with the aid of agitation or ultra-Sonics the process is vastly improved. Will remove a vast range of paints lifting the paint into skins which aids the life of the stripper if removed regularly
MANSOL RUST ABSORB 7
Absorbs the rust into the solution without attacking the parent metal Used at typically 20% concentration can be used at room temperature by raising to 70c the process time is shortened; Ultra-Sonics will improve results dramatically.
This high-pressure additive is a concentrated blend of Alkali products and surfactants producing a heavy-duty cleaner, developed for hot and cold pressure washers this product is also used as a general cleaner in workshops due to its high detergency even at low concentrations for workshop floors to machine wash downs used at 1to10% this is an industrial strength product and is not recommended for cleaning cars or any other highly finished products
MANSOL CITRIC DE-SCALE
This is a highly concentrated Citric Acid based rust and oxide remover which has an inhibitor to protect against flash re-rusting. Used at room temperature to 80 degrees' C At concentrations from 2 to 20% depending on scale to be removed, the properties of the parent metal and through put of components. This can be greatly increased by use of flow machines or ultra-sonic machines. Used at low concentration and temperatures will remove rust from chrome plated components. Will remove oxidisation and brighten aluminium components such has cylinder heads and turbo housing
This is a fast-drying solvent blend used mainly for degreasing large component usually applied with brushes or cleaning clothes. The solvents act together to give a very effective powerful cleaner on parts that maybe too big to fit into cleaning tanks or machines
MANS0L WS 80
This is a Dichloromethane based paint and lacquer which contains Hydrofluoric acid which is used on difficult coatings widely taken by alloy wheel refurbishing industry This formulation contains a wax seal which helps suppress fumes
MANSOL JET BLACK
Jet Black is a room temperature blacking process, which produces a black oxide finish on steel a safe alternative to the hot blacking process. Used for blackening nut and bolts to highly machined components also used as a decorative coating and lacquered rather than the usual dewatering oil
MANSOL DE-WATERING OIL 76
This is used after the final rinse on many lines to provide excellent rust prevention with an ultra-thin oily film which will give several months' protection depending on storage conditions. For best results a purpose made tank should be used, with false bottom and water drain off tap to take away displaced water.
MANSOL DE-WATERING OIL 21
This is a heaver oil than the DW76 and will give 1.5 times longer protection and is all down to customer preference samples of both can be provided
MANSOL B&C BLACK
This is a solution which is added to two parts water and heated to 90 up to115 degrees C to give a decorative black finish on Brass and Copper and after rinsing is oiled or lacquered
This is a solution used by the Engine refurbishing industry. It is used cold in a soak tank and will rapidly remove paint and carbon with no attack on Aluminium components and has an inhibited water based seal to suppress fumes
This is a highly alkaline blend of non-aqueous solvents and emulsifiers specially formulated for stripping lacquer/glaze from food trays used at 45 degrees C
MANSOL SOLDERING SPIRITS
This is a solution which is used neat by radiator manufactures and refurbishers and is a zinc chloride base formulation
All chemicals are formulated on site and full technical support available.
We can supply from 1litre, 5 litre, 20 litre to 1000litre IBC.
Samples available on request.
Please note that some products are designed for workshop and factory use and may not be suitable for home use. Please contact us for more information.