0800 731 80500800 731 8050

01543 505 77101543 505 771

Contact Us

www.thepolishingshop.co.uk
Metal Finishing Supplies Ltd, North Street, Bridgtown, Cannock, Staffs, ws11 0az, UK Mainland.

My CartView CartCheckout

My Cart

Items:  items
Value: 

0800 731 80500800 731 8050

01543 505 77101543 505 771

www.thepolishingshop.co.uk
Metal Finishing Supplies Ltd, North Street, Bridgtown, Cannock, Staffs, ws11 0az, UK Mainland.

Lacquers

Page:   <<   <  1  2   View All (21)

Ercalene Reducer 5 Litre Tin

In stock

Frigilene reducer is to be used with the Frigilene lacquer. For some applications you may need to dilute the lacquer. For example spraying applications.

Price: 63.60 (Including VAT at 20%)

Quantity:  

Lacomit Stopping off Lacquer 250ml Tin

In stock

Stopping off lacquer for general plating conditions e.g nickel and chromium plating.

Price: 7.09 (Including VAT at 20%)

Quantity:  

Lacomit Stopping off Lacquer 1 Litre Tin

In stock

Stopping off lacquer for general plating conditions e.g nickel and chromium plating.

Price: 16.38 (Including VAT at 20%)

Quantity:  

Lacomit Stopping off Lacquer 5 Litre Tin

In stock

Stopping off lacquer for general plating conditions e.g nickel and chromium plating.

Price: 102.00 (Including VAT at 20%)

Quantity:  

Lacomit Remover 250ml Tin

In stock

To remove the Lacomit stopping off lacquer.

Price: 7.09 (Including VAT at 20%)

Quantity:  

Lacomit Remover 1 Litre Tin

In stock

To remove the Lacomit stopping off lacquer.

Price: 15.18 (Including VAT at 20%)

Quantity:  

Lacomit Remover 5 Litre Tin

In stock

To remove the Lacomit stopping off lacquer.

Price: 70.80 (Including VAT at 20%)

Quantity:  

No45 Stopping Off Lacquer 1 Litre tin

In stock

Price: 26.40 (Including VAT at 20%)

Quantity:  

Lacquer Faults

In stock


Problem-
Poor Adhesion
Cause-
Oil, grease or tarnish on article
Oil or moisture coming through spray equipment

Problem-
Blooming, brushing, chilling or clouding. White film on lacquer surface.
Cause-
Lacquer drying in a cold humid atmosphere
Unsuitable thinners being used.

Problem-
Rainbows or Iredescent colours
Cause-
Lacquer too thin, possibly faulty application or too much reducer.

Problem-

Problem-
Rippling
Cause-
Gun too near article.

Problem-
Graining
Cause-
Drying too quickly.

Problem-
Spots and specks
Cause-
Dusty workplace or possible spotting-out of plating solution of base metal

Problem-
Streaks and stains.
Cause-
Handeling works before lacquering or ineffective cleaning of articles prior to lacquering.

Problem-
Orange peel effect.
Cause-
Spray lacquer too viscous or use of unsuitable reducer

Problem-
Rough film
Cause
Spraying with too narrow jet,or gun too far from article.
Or use of dirty brushes or dirty lacquer container.

Problem-
Runs or tears.
Cause-
Too much lacquer applied.
Unsuitable position of draining
Too rapid withdrawal from dipping


Page:   <<   <  1  2   View All (21)